Plans & Kits

An easy and inexpensive to build, 8 ft. sailing pram

HADRON is a new dinghy design for 2011.

The input was “design a pure cruising boat”.The boat has wide internal volumes, limited draft, average/high displacement and sailing area which do not require a continuos sail change.The hull lines have been developed both to corner and round.We wanted to realize something new for deck design.

Like many traditional canoes, the Sassafras 16 is symmetrical, bow and stern. This allows a solo paddler to sit facing backwards on the forward seat for better trim. An elegant lapstrake canoe for two

The Pro Tunnel is an outboard racing tunnelboat designed for APBA class GT Pro, but also makes an excellent small high-performance boat for the non-racer, and a great individual or family building project.The Pro Tunnel is capable of 50mph+ with recommended power.

An entry-level sliding-seat pulling boat. Provides rewarding speed in an easily built hull with enough stability to keep a beginner out of trouble. Construction: Plywood. No lofting is required. Plans include 5 sheets.

Round-bottomed, transom stern, centerboard, 2-4 daysailing.

Contruction: Carvel planked over steamed frames

Alternative contruction: Lapstrake, strip or cold-molded

Lofting is required

Plans include 3 sheets

The Solo Quick blends efficiency, weight carrying capacity and beauty. Paddlers will find that her lean entry and minimalist profile make for a surprisingly quick and versatile hull.

Cutter designed by William Fife Jr., in 1888.The plans produce a model that is 28″ in length.You’ll receive 3 pages of plans historical information about the boat, step-by-step instructions and full-sized patterns for each lift, as well as template for you to shape the profile.

A small and very simple tender to fit inside a station wagon or on a roofrack, this little plywood dink will suit some one wanting a tender for their small yacht or motorboat.