Plans & Kits

An easy and inexpensive to build, 8 ft. sailing pram

“Trixie” began as an idea for a small and simple to build plywood tender, able to get out to a mooring with two or three on board, that was very light, incorporated wheels to enable transport to the slipway, was designed to provide the maximum space from two sheets of 1/4″ plywood, and could be p

BlueMotion is a new 5.5m dayboat (or large dinghy) design for 2013.

20' expedition size, double kayak, accommodates big people with big feet in an efficiently paddled hull.

Light, elegant double-paddle canoe for glued-seam lapstrake construction.Can be built 12′, 13′ 7″, or 15′ 2″ from the same set of plans.Construction: Glued lapstrake plywood.Alternative construction: Traditional lapstrake, cold-molded or strip.No lofting required.Plans include 5 sheets.

Roberts 434 Wood Epoxy Sailboat

The project, despite its small size, develops a discrete internal volume allowing to nr. 4 crew members to spend short cruises with good speed and pleasant navigation.The hull lines and the deck are to corner for simplicity of construction, and are harmonized with the hull volume.

A most elegant lapstrake, plywood peapod for oar and sail.

Full-sized mold patterns are included.

Construction: Glued-lapstrake plywood.

Alternative construction: Traditional lapstrake.

No lofting is required.

The time of England’s racing dinghies was dominated by Uffa Fox’s boat the “Alarm”. Simon's take on the expert design is a tribute to an age of lightning-quick wooden racing boats.

A 15' Inboard Plywood Powerboat