Plans & Kits

The CS23 is an offshore boat based on the Carolina Sport Fishing boats lines.

This is a design for a basic hull made from one piece of closed cell foam 1m x 4m x 50mm thick.

Attention Amateur and Professional Boat Builders!Bayside Marine Design has stock electrical plans for your boat project. All of the information and schematics you need to wire a new boat or re-wire an existing boat are in the package.

Our pre-cut kits are cut by computer-guided routers to provide you with accurate parts. And, the kits come with just about everything needed except the elbow grease.The ladder frame—the “foundation” of the boat—is now included with the kit.

Lapstrake-plywood daysailer with a shapely wineglass transom, unstayed sprit rig, and wide, flat, keels for easy trailering.

Construction: Lapstrake plywood planking over steam-bent frames.

Alternative construction: Cold-molded or strip.

No lofting is required.

Kiska is a wood strip/epoxy single kayak. Based on Greenland kayak lines, this low volume kayak is playful but tracks well

ROBERTS SPRAY 36 is a well proven offshore cruising sailboat that you can build from plans and full size patterns

A 15' Inboard Plywood Powerboat

The Duo is a simple to build 3m (10ft) hard chine rowing and sailing dinghy that can be built from just two sheets of 4mm (3/16in) plywood. It is also available as a nesting dinghy, so it can be stored on a cabin roof or even in the back of a car.

This 17' x 20" [5.2m x49cm] strip planked kayak is designed for comfort and speed in rough water. With a lot of capacity for gear, it can be used as an efficient expedition vessel while being fast, quick and fun as a day tripper. It will excel at downwind runs.