If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here.
There is no charge for listing, but the FEATURED BOATS MUST BE BUILT OF WOOD.
To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
The Nomad is long, sleek, easy to plank and easier to paddle.
SPRITZ, an essential and simple boat, has been studied and designed to be the ideal boat for novices in boatbuilding or in sailing.
The project, despite its small size, develops a discrete internal volume allowing to nr. 4 crew members to spend short cruises with good speed and pleasant navigation.The hull lines and the deck are to corner for simplicity of construction, and are harmonized with the hull volume.
24′ Chesapeake Bay Hampton FlattieL.O.A.: 24′ 2″L.W.L.: 22′ 8″Beam: 7′ 9″ Draft: 2′ ½″/3′ 9″Sail Area: 263 sq ftWeight: 2,500# (approx)Proportionately, this is the largest sharpie type known, and shows the maximum beam ratio successfully used in the sharpie type.
Our pre-cut kits are cut by computer-guided routers to provide you with accurate parts. And, the kits come with just about everything needed except the elbow grease.The ladder frame—the “foundation” of the boat—is now included with the kit.
This 17' x 20" [5.2m x49cm] strip planked kayak is designed for comfort and speed in rough water. With a lot of capacity for gear, it can be used as an efficient expedition vessel while being fast, quick and fun as a day tripper. It will excel at downwind runs.
MIA is a 12 foot runabout, Her design is inspired by William Jackson's 1955 design for the 'Ace' which was produced by the Sande Boat Works between 1956 and 1962 (www.sandeace.com).This design differs from those of the period in that it is to be constructed i
My client wanted to circumnavigate, Cape Horn and all! He wished to build the boat himself and had limited skills in boatbuilding, limits on his budget, and a space about the size of a double garage.
The CS-18 is an open interior design with the home builder in mind. It is designed for an above deck fuel tank and less aggressive flare in the bow. These features make this design an easier and faster build and at 18.5′, it will fit in most home garages.
Two matching 8' fiberglassed okume plywood boats with 6 and 8-hp motors carried on one trail
Located in Mystic, Connecticut
- 3 staterooms and salon with A/C units, sleeps 8
Beautiful boat once restored (2016) Unfortunately neglected since.
Thames River racing skiff converted to expedition style rowing boat. Built 1900-1918 by E.
