If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here.
There is no charge for listing, but the FEATURED BOATS MUST BE BUILT OF WOOD.
To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
Good performance with modest horsepower, a soft and predictable ride. I/O or outboard, 80-200hp.
This is a larger version of my 28ft Gypsy sailing catamaran and is a 34′ offshore cruiser. It has essentially the same cuddy as Gypsy as that has proven a comfortable size for a couple and occasional guests.
The lines for this canoe were taken from an original ‘Huron’ built in cedar/canvas by the Peterborough Canoe Company. It was a second grade model in a series of Cruiser canoes that measured from 16′ x 33″ to 18′ x 37″.
Rugged little launch with generous beam.
Construction features a traditional backbone of bolted-up oak, steam-bent frames and strip-planking. Four different arrangements are shown.
Construction: Strip-planked over steam-bent frames.
This is my latest design for the Twopointfour metre class. An easy to build lowbudget boat ment to be competetive on the race course.
The project of Acyd 950 was born on the regulation of “class 950”.These boats have an extremely light weight and high performance and they can safely be used on a cruise.The remarkable minimum lightness is only 2700kg and it is compensated by the strong bulb elongation that carries the maximum dr
Parker Marine Enterprises—Sea Bright 38Length Over All: 37′ 11”Beam: 10′ 6″Draft: 2′ 4″Displacement: 9,500 lbs, half-laden (approximate)Power: Yanmar 4JH4HTE (110 hp int/99 hp cont)Water: 200 gallonsFuel: 200 gallonsAccommodations: Sleeps four in double V-berth and two settee berths.
LYS stands for Lumber Yard Skiff. These rugged flat bottom work skiffs were originally designed to be built using materials readily found in most lumber yards- underlayment plywood and spruce framing.
Capacious, seaworthy, flat-bottomed skiff weighing less than 150 lbs. Construction: Cross-planked bottom, lapstrake sides. No lofting is required. Plans include 5 sheets.
I bought the boat in 2012 from the original builder in Fairfield, Connecticut.
Custom built at Madisonville Maritime Museum. 2019 19' magic tilt galvanized trailer.
Custom row boat built by Brooks Boats in Mt. Desert, Maine.
El Toro one design in nice shape. Go sailing or refinish for a showpiece.
