If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here.
There is no charge for listing, but the FEATURED BOATS MUST BE BUILT OF WOOD.
To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
BABY BAGGIE is quite long and difficult to build for its size (10 Foot) but has been designed mainly to satisfy the desire of having a small elegant boat.
An open shoal-draft centerboarder suitable for rowing, daysailing, or coastal cruising.
Construction: Carvel planked over steamed frames
Alternative construction: Lapstrake, strip, or cold-molded
Lofting is required
Plans include 3 sheets.
Jolly Boat is a rocking toy boat designed to provide years of make-believe nautical adventure for the young sailor, It is an adaptation of the classic flatiron skiff, a type that generations of “old salts” remember fondly as their first “real” boat.Jolly Boat has a length of 48″ and a beam of 23″
“Trixie” began as an idea for a small and simple to build plywood tender, able to get out to a mooring with two or three on board, that was very light, incorporated wheels to enable transport to the slipway, was designed to provide the maximum space from two sheets of 1/4″ plywood, and could be p
An outboard skiff with a wide bottom and moderate rocker that contribute to stability and the ability to carry weight back aft.
V-bottomed cruiser designed for plywood construction with accommodations for two and inside ballast.Construction: Plywood planking over sawn frames.Lofting is required.Plans include 11 sheets.Please note: gaff rig version’s mast measurements are taken by scaling from the plans.Notice the below de
A versatile 4-metre open utility / runabout for river and inland lake use, built in taped-seam plywood.
Simplicity of construction, user friendliness (both for single or double) and high performance – all of this with reasonable costs. These are the main priorities which lie at the base of the DP 14’ design and which justify the main choices made, in particular:
Bow and stern of English traditional narrowboat. Cutting files to produce a kit of steel parts for assembly. The midsection is a parralel box that can vary between 20 and 40ft. The midsection is produced by folding steel plate then adding the bow and stern.
Halsey Herreshoff designed this beautiful cat ketch built in 1982 with an all wood Honduran pin
A blend of traditional New England and European launches with full displacement hull combined wit
