Sailboats - Cruising
Wynfall
Wynfall is a small but capable cruising boat -- although only 26' long, she has a waterline of almost 24', and displaces 9500 lbs.
If you’re in the market for a boat to build, this directory of Boat Plans & Kits is a fine place to start. And if your company sells plans or kits, we invite you to list your offerings here. There is no charge for listing, but the FEATURED BOATS MUST BE BUILT OF WOOD.
To refine your search of this directory, use quotation marks. If you search Nutshell Pram Kit, you’ll receive all the listings that include the words Nutshell, Pram, and Kit. To refine your search, enter “Nutshell Pram Kit”; you’ll then see only the results for Nutshell Pram kits.
To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.
Wynfall is a small but capable cruising boat -- although only 26' long, she has a waterline of almost 24', and displaces 9500 lbs.
As featured in WoodenBoat issue #274, the Tombolo 28 is an iconic modern classic outboard-powered cruiser. The mission of the design dictates a maximum length under 30′ and a trailerable beam.
If you are considering building a wood-epoxi Optimist dinghy, you will definitely need our Optimist Dinghy Template Plans.
Full-sized patterns for molds, so lofting is not required. Construction: Carvel-planked over steamed frames. Alternative construction: Lapstrake or strip. Plans include 4 sheets.
Round-bottomed pocket cruiser with room for an inboard auxiliary and accommodations for two.
Construction: Carvel planked over steamed frames.
Alternative construction: Cold-molded or strip
Lofting is required.
Plans include 11 sheets.
Rugged, simple, stable, and economical to build, the Lumber Yard skiffs are based on traditional New England flat bottom work skiffs.
‘Volare’ comes in two versions. This is the console version, the utility version is available as a separate set of plans. They’re both 15′4″ long and 5′ wide.Her length is that of two sheets of 8′ plywood and she’s built in two halves (bow end and stern end).
The Clyde one-design 20-tonners as they were known were very popular and described by the Yacht Racing on the Clyde review of 1899 as "able and comfortable at sea, fairly speedy on the race course...
After significant rebuild in '97-'98, daysailing and Master Mariners racing in San Francisco Bay.
Handcrafted, Wooden, 30,000 hours of making Remote Control Ship with 5 Sails and 2 Motors Powered
Wood composite construction, professionally built, beam 8 feet, draft 16 inches.