September / October 2025

Swan Point Garvey

Re-creating a coastal New Jersey classic
The Swan Point Garvey

Benjamin Mendlowitz

The Swan Point Garvey is the culmination of Russ Manheimer’s years of dreaming about the perfect boat for day excursions in the coastal marshes of New Jersey. Doug Hylan designed the boat, and his shop, Hylan & Brown Boatbuilders of Brooklin, Maine, built it in time for an early June launching.

The daydream goes like this: It’s a beautiful but chilly fall day on upper Barnegat Bay in New Jersey. After being out all day in a dying, dry northeaster in our double-ended, lapstrake-planked 22' kosterboat SJOGIN, my wife, Julia, and I anchor off Reedy Creek, a mile from where she began her outing at David Beaton and Sons Boat Yard. After the stove has been banked in anticipation of a warm return, the tender is brought alongside. There’s an hour before sunset and just enough breeze for a quiet sail. As the breeze dies, the tender is rowed back to SJOGIN. The rig is put away and the tender drops aft. After a glance alow and aloft, the hatch is slid open and the warm cabin awaits.

I’ve had this recurring daydream for many years. All of our sailing in SJOGIN consists of daysails. Once in a while, however, the thought of anchoring out and having a small boat to go ashore or mess about in our remaining creeks and marshes has seemed appealing. I have spent many a watch below, thinking of a suitable tender.

Since my introduction to small sail-and-oar craft through John Gardner in National Fisherman in the 1970s, I’ve been attracted to traditional boats. My first was the conversion of an elderly 15' Charles Hankins Sea Bright beach skiff to a sprit-rigged sloop in the mid 1970s. After a few years with a hard-chined tabloid sloop, I’ve been lucky enough to be the steward of SJOGIN for the past 38 years. Though she is certainly traditional, her tradition lies about 3,800 miles to the east-northeast, in the Koster Islands on the North Sea coast of Sweden.

 

To read the rest of this article:

Click the button below to log into your Digital Issue Access account.

Read the Issue

 

No digital access? Subscribe or upgrade to a WoodenBoat Digital Subscription and finish reading this article as well as every article we have published for the past 50-years.

Subscribe Now

 

Purchase this issue from WoodenBoat Store

From This Issue

Issue No. 306
RAGTIME

In the 1960s, her rivals called her the “Black Box” and a “plywood New Zealand

Issue No. 306
Shop-made jig

A bandsaw is one of the most useful power tools in a boatbuilding shop. The saw

Issue No. 306
GERMANIA III

The Baltic Sea off the yachting capital of Kiel, Germany, was a natural venue

Issue No. 306
Smoothing tools

Fake beams in ranchburger tract houses emphasize the rough timber gouges of the

From Online Exclusives

From the Community

Classified

Classified

Custom 2014 Downeast

Beautiful custom 40' boat was constructed using high quality materials, proven construction metho