Plans & Kits

Deck saloon voyager

Introducing Wee Pumpkin, the newest addition to our cradle boat fleet! Featuring full size patterns for all parts, a complete construction booklet, and a unique building system that is builder and baby-friendly.

Construction - Glued lapstrake plywood.

Alternative construction - Traditional, cold-molded and strip plank.

No Lofting required.

Plans include 8 sheets.

Sail Area - Lug 87 sq. ft.

Sloop 104 sq. ft.

Yawl 121 sq. ft.

The Coot is a handy little yacht tender with a lot of capacity.

This 20′ cutter will prove challenging to build, but will reward your efforts with incomparable charm and grace.Atkin specifies traditional plank-on-frame construction.Construction: Carvel-planked over steamed frames.Alternative construction: Cold-molded or strip.Lofting is require.Plans include

Feel the difference a proportionally correct sized kayak can make in your paddling enjoyment.

Our Deben Class designs are inspired by the original Deben 4-tonner, which my father commissioned from W. M. Blake in 1936 and the Deben 6-tonner, designed by my father in 1950. At least 35 of the 4-tonners and 3 of the 6-tonners were built between 1937 and 1960.

Keel/centerboard cutter designed by Edward Burgess in 1888 and first of his “Compromise 40-footers”.The plans produce a model that is 25″ long.You’ll receive 4 pages of plans historical information about the boat and step-by-step instructions for half-hull building,using the lift method.There are

“Goldfish” is the slightly smaller version of our “Happy Hour” fishing kayak. Splicing of plywood sheets is not required as is the case with “Happy Hour”. All parts of the boat fit within the length of a standard sheet of 1/4″ (6mm) exterior grade plywood 8′x4′ (2.4x1.2m).

If we have to base ourselves on market demand before 2008, the two daysailers that we propose are very small. At that time, generally characterized by a continuous increase in boat size, it seemed as though a daysailer could not be less than 12 m, (even better if it exceeded 15 m).