Bounty

Bounty was built and launched in the UK by Mark Evans of Kentish Boats. With a set of 6′ 10″ oars it rows very easily and can take 367lbs of people or kit. The bottom panel and frames/bulkheads locate together providing a quick assembly method to accurately hold the construction frame in position for planking. With the availability of oversize plywood sheets there is no need to scarf planking to obtain the lengths necessary. For further information go to http://www.kentishboats.co.uk/

From the Community

Classified

Boat Launchings

Boat Launchings

PT 11

I built this PT 11 nesting dinghy from the CLC kit over this past winter, to replace a 9'6" Nutsh